{"product_id":"2022-2024-cummins-tuning-kit-ram","title":"2022-2024 Cummins All in One Kit (DIY Kit) | Ram 6.7L","description":"\u003ch1\u003e2022-2024 Cummins All in One Kit (DIY Kit) | Ram 6.7L\u003c\/h1\u003e\n\u003cp\u003e🚀 Stock ECM power added through EZ Lynk tuning is finally here for the 22–24 Cummins applications.\u003c\/p\u003e\n\u003cp\u003eEverything you need to unlock your 6.7L Cummins from home — engine tuning, transmission calibration, exhaust, and the hardware to install it, backed by tuning support for as long as you own the truck. 💪\u003c\/p\u003e\n\u003ch2\u003e✅ Factory ECM Compatible — No Swap, No Mail-In Unlock\u003c\/h2\u003e\n\u003cp\u003eThis is the big one: your stock ECM stays exactly where it is. Flashing this way is fully safe for your factory ECM — nothing about it puts your stock computer at risk down the road, now or later.\u003c\/p\u003e\n\u003cp\u003eThanks to updated EZ Lynk support, most 2022–2024 6.7L Cummins trucks now flash directly through the OBD-II port on the stock ECM. Plug in, load your custom tune, and flash — no ECM swap and no sending your ECM out for an unlock.\u003c\/p\u003e\n\u003cp\u003e💰 No more dropping another $3,000+ on an ECM swap just to tune your truck. The capability to do this entirely yourself — with nothing but an EZ Lynk — is finally here.\u003c\/p\u003e\n\u003cp\u003eAlready running a swapped or previously unlocked ECM? You're still fully supported with this kit. 👍\u003c\/p\u003e\n\u003ch2\u003e📦 What You Get\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eExhaust (pick one)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e🔥 Race pipe\u003c\/li\u003e\n\u003cli\u003e🔥 Full 5\" system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions hardware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEGR upgrade solution, matched to your exhaust selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequired bypass hardware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e🔌 2018+ Security Gateway bypass cable (needed for flashing on these trucks)\u003c\/li\u003e\n\u003cli\u003e🔌 CCV switch-on-the-fly cable, for setups using SOTF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlash device\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e📲 EZ Lynk AutoAgent 3 — our pick for this platform for ease of use and flash reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚡ Engine Tuning\u003c\/h2\u003e\n\u003cp\u003eCustom power-added calibration built around your specific truck and mods, with ongoing support included for the life of your ownership. Available as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle fixed-power tune (0–200 HP baseline)\u003c\/li\u003e\n\u003cli\u003eSwitch-on-the-fly, multiple power levels (0–200 HP baseline)\u003c\/li\u003e\n\u003cli\u003eHigher power levels for trucks with supporting fuel, turbo, or injector upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStated HP ranges assume a stock or near-stock truck — every calibration is tailored to your actual setup, not a generic file. ✅ Safe, custom, and built for your combo.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Transmission Tuning\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e68RFE — included in this kit\u003c\/strong\u003e Fully custom calibration covering:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShift timing and shift point scheduling\u003c\/li\u003e\n\u003cli\u003eLine pressure (stock or increased, for better clutch holding capacity)\u003c\/li\u003e\n\u003cli\u003eTorque management matched to your tune\u003c\/li\u003e\n\u003cli\u003eUD pulse disable option\u003c\/li\u003e\n\u003cli\u003eLocked\/unlocked shift behavior and TCC lockup timing\u003c\/li\u003e\n\u003cli\u003eShift feel tuned firmer or smoother\u003c\/li\u003e\n\u003cli\u003eTow vs. daily-driver shift strategy\u003c\/li\u003e\n\u003cli\u003eCalibration built for stock or built 68RFE units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you're chasing better towing manners, crisper daily shifts, or a more aggressive setup, the 68RFE calibration is built around your power level, tire size, and how you actually drive the truck. 🚛\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAISIN transmission\u003c\/strong\u003e Sold separately — not included in this kit. Reach out if you're running AISIN and need it added.\u003c\/p\u003e\n\u003ch2\u003e🔁 Switch-on-the-Fly\u003c\/h2\u003e\n\u003cp\u003eChange power levels without a full re-flash. Depending on your build, SOTF is handled via the CCV-style cable or DEF-gauge switching. Hardware needed varies by configuration.\u003c\/p\u003e\n\u003ch2\u003e♾️ Ongoing Tuning Support\u003c\/h2\u003e\n\u003cp\u003eIncluded for as long as you own the truck:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd new modifications to your calibration as your build changes\u003c\/li\u003e\n\u003cli\u003eAccess to special tuning functions (limiter adjustments, rumble idle, 12V idle, low boost fueling, and more — availability depends on your exact hardware)\u003c\/li\u003e\n\u003cli\u003eContinued support as your setup evolves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Before You Order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSGW bypass cable is required on 2018+ trucks and is included in this kit\u003c\/li\u003e\n\u003cli\u003eFactory ECM applications need no swap and no mail-in unlock — the stock ECM stays in the truck, safely, permanently\u003c\/li\u003e\n\u003cli\u003eIf you already have a compatible swapped or unlocked ECM, you're still covered\u003c\/li\u003e\n\u003cli\u003eDouble-check your exact year, ECM configuration, and transmission type before ordering — hardware and tuning needs vary by build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eOff-road use only.\u003c\/strong\u003e Not legal for emissions-controlled vehicles operated on public roads.\u003c\/p\u003e\n\u003cp\u003e🚫 Does not support cab chassis configurations.\u003c\/p\u003e","brand":"SLAB INDUSTRIES DIESEL","offers":[{"title":"4\" Race Pipe \/ Straight Pipe \/ I have my own tuning device","offer_id":62651173568593,"sku":"SLAB-CUM-2224-KIT-4IN-OWN","price":2150.0,"currency_code":"USD","in_stock":true},{"title":"4\" Race Pipe \/ Straight Pipe \/ EZ Lynk AutoAgent 3","offer_id":62651173601361,"sku":"SLAB-CUM-2224-KIT-4IN-EZL","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"Full 5\" Exhaust \/ I have my own tuning device","offer_id":62651173634129,"sku":"SLAB-CUM-2224-KIT-5IN-OWN","price":2550.0,"currency_code":"USD","in_stock":true},{"title":"Full 5\" Exhaust \/ EZ Lynk AutoAgent 3","offer_id":62651173666897,"sku":"SLAB-CUM-2224-KIT-5IN-EZL","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/9583\/6497\/files\/b57a90d4-272d-42fb-b81f-c4bc96abeb19.jpg?v=1789672288","url":"https:\/\/slabindustriesdiesel.com\/products\/2022-2024-cummins-tuning-kit-ram","provider":"SLAB INDUSTRIES DIESEL","version":"1.0","type":"link"}